11 An effective step to speed up Wi-Fi and strengthen network signal :
If you have a slow internet connection, either on the computer or the phone, we will give you today the most reliable solutions you can rely on to speed up Wi-Fi as fast as possible and eliminate any losses that may lead to you not having full Internet speed. How to speed up the net on the computer if you use an Ethernet cable, and also know the Internet acceleration program, which is used to adjust the settings of the device to achieve the best speed, but in this article will learn the best steps to accelerate the Wi-Fi network for those who rely on the use of wireless network " Computer and phone, this will guarantee you E Steps to strengthen the Wi-Fi signal until you get the fastest Internet on your computer and Android.
How to make sure your internet speed :
Before we list the most effective steps to get the best speed from your network, you will first have to check your Internet speed. After the scan is done and you find that your speed is less than the speed limit, you can start by following the steps in the article Step you can re-test and see the speed improvement.
- This test can be done easily by using one of the sites measuring the speed of the net, or you can follow the link below to learn the five different ways you can measure the real Internet speed Mega, then save the test results and start to apply the steps of improvement mentioned in the article, Big, God willing, you get the strongest signal and the fastest Internet.
Speed up Wi-Fi through proper installation :
In the beginning we will learn about a set of steps that must be implemented in order to correctly set the Router, ensuring that you have the strongest signal. Then we will learn about the second part, which will enhance the signal.
1. Place the router in a convenient location :
- Of course, wireless signal strength depends greatly on the degree of proximity or distance of the signal source, so the closer you get to the router the stronger the signal and the Internet faster, and vice versa, so you have to consider that make the wireless at the best place to transmit the signal at home so Everyone gets a signal and good speed.
- Also important things that you should pay attention to is the position of the wireless, so avoid placing it on the ground so as not to cause problems or objection to broadcast the network, also kept away from the position in the tight or narrow places that will weaken the signal, try to put it in a relatively open In the middle of the house or office is a good height.
2 - Avoid placing the router next to the source of electromagnetic signals :
- Wi-Fi signal strength is also the interference of electromagnetic signals that come from different sources close to the wireless, of course, these signals may intercept the router signals, resulting in significantly lower your speed, as well as the things affecting the quality and strength of signal access to the user.
- These sources transmit signals that interfere with and cause problems with wireless Internet signals, so avoid placing the router next to any of the sources mentioned and try to be As far away as possible from any other device.
3. Connect the router directly from the line :
- Many users rely on the ground-based router to connect to the Splitter or filter as it is called, which gives more than one port to use the line to connect the phone as well as to connect the Internet. If you use this tool, you should do away with it if you want to get the best speed of the Internet You reach the router.
See also : Share pc internet with android via bluetooth
- If you do not need to use the landline, your first advice is to dispense with the distributor. If you are using it, it has an impact on the Internet speed that reaches the router. This will affect the speed of the wireless network and you will feel slow and you do not get full internet speed.
4- Updating the firmware system :
- Any electronic device that owns the router operating system is stored on a piece of hardware inside the device called Firmware, through this system can control the router completely, it connects your Internet connection to the company and implements the implementation of the commands such as disable the network and block the devices and Change password and other router.
- Like any operating system updates are periodically updated to address any router protection issues as well as upgrade the operating system for better use and solve any problems affecting router performance, all you have to do is go to Google and type your router type followed by the word " Latest Firmware "To show you the latest update to the router, you will then compare the latest version to the version you have and if you are not using the latest update, upgrade.
5-Change the old router :
- The last option with us in this section is a very effective option by upgrading the same frequency with the latest one, of course most users rely on the free devices they get at the beginning of their subscription, but these devices are very weak for the quality of the signal and the extent it can cover, For updates.
- Now that you have chosen a new device you should make sure it supports several things. First, the new 802.11ac technology, which will give you much better features than older technologies such as 802.11g or 802.11n, also includes the largest number of Antennas, Finally, try looking for a router that supports the new WPA3 encryption system, which will make it almost impossible to penetrate your network.
6- Change the WiFi Channel broadcast channel :
- This method depends simply on the mechanism of working Wi-Fi signals that are transmitted in the air through channels, if happened and there were a lot of sources that are transmitted in one channel will lead to the overlap of these signals and thus weaken the other and hence the final signal is weak and you will find that Your net speed is bad.
- When you install your router, the device automatically selects the busiest channel where you will get the best broadcast signal, but over time will install other networks close to you and will share with you in the same channel, so you must change to another channel and to You can use the Homedale program on your computer or the Wifi Scanner application on Android and find the best channel and then go to it through router settings.
7. Choice of the 2.4 GHz or 5 GHz frequency band :
This is one of the most important steps that will definitely help you adjust your network as you use it. Of course the difference between the two bands or the frequency band concept is a long explanation but the important thing here is that there is a difference in each range. For example if you share Wi-Fi with a group Such as colleagues in the office or family members and would therefore want better coverage of the network so that the Internet is good for all users, so it must rely on the 2.4 GHz band.
But if you are using the network on your own and no one else you will definitely want to rely on the speed element here you must rely on the 5 GHz band which will provide you with less coverage and faster speed. Of course, all routers provide a 2.4 GHz band, Dual-Band Wireless or Dual-Band Wireless, of course you specify the appropriate range for you and if your device supports it and then changes it from the router settings.
Protect the router from hacking :
- It is common to cause the slow Internet in many users there are many people who could access the network without the permission of the owner because of the weakness of the protection procedures used, of course we discussed in the previous topic of the most important ways you can rely on the protection of Wi-Fi from Breakthrough in any known way.
- Of course, the most important of these steps using the most powerful encryption system for the currently available WPA2, which is difficult to penetrate, also one of the most important gaps in the networks is not to change the default access information for the router as well as not change the password of Wi-Fi periodically, and also hide Wi-Fi through blocking Network name from appearing, make sure you do these steps to ensure that your connection is not stolen from anyone else.
9- Choosing the frequency of the Wi-Fi channel Bandwidth Width :
- We talked about two previous points about how to choose the right channel for you and get away from busy channels in order to accelerate Wi-Fi, also talked about the frequency band 2.4 GHz or 5 GHz and the difference between them and what is best in use, there is also a very important point is the frequency selection of the channel is The extent to which the spread of Wi-Fi.
- There are two main options you will find inside the router are the option 20MHz 20MHz and 40MHz 40MHz, here is the best option for you is to use the frequency 20MHz, which will provide you a stronger signal because the use of the other frequency 40MHz will cause the instability of the network because it will interfere with other networks, Some devices do not support 40 MHz frequency, you will find this setting in the wireless network settings on your router as in the picture.
10. Turn off power save mode for network :
- Some routers may come with "Power Saving" or power save mode, which saves power. This mode affects the transmission of the signal so you will not receive the signal as desired and will feel slow in the network. If you want to strengthen the Wi-Fi signal, This option will use the maximum power mode.
- Also on the computer you will find this mode in the power settings on the computer as picture, from the option "Wireless Adapter Settings" and then "Power Saving Mode" Make sure to activate the "Maximum Performance" mode to get the best performance from the router and the best broadcast to your network.
11. Short tips for speeding up Wi-Fi :
Restarting the router helps to better speed
Use the tin rolls around the router antennas to strengthen the signal
Update Internet cables periodically to ensure the best possible performance
You can use the Heatmap tool to see signal strength throughout the place
Set Antenna antennas in opposite directions horizontally and vertically
Continue your consumption so you do not end up consuming the package and low speed
Make sure that no one is accessing your network, which will consume your speed
You can change the DNS router to get a better speed than the speed at which you work
Check your device to make sure there are no applications running in the background that consume the Internet
If your previous steps do not work, there is a problem with your line and you should check with the company
Report
